NE-ONE Network Emulator Range

Simplifying Application Performance Testing over Networks.NE ONE Range

The  NE-ONE  Emulator  has  been  designed  with  ease-of-use in mind.  Whether  you  are  an  Application Developer,  Software Tester, Network Engineer or a Systems Architect, it will enable you  to  quickly  and  easily  recreate  a  wide  range  of  realistic networks (LAN, WAN, Internet (cloud), Wi-Fi, (A)DSL, Mobile, Satellite, etc.) in order to verify application performance.

The NE-ONE Emulator is available to purchase as either a Desktop Appliance, Rack-Mount or VMware Ready Virtual Appliance (Model Dependent) 

Key Features

GUI

Intuitive & Intelligent Pictorial Web GUI
At the heart of NE-ONE’s ease-of-use is its intelligent user interface which is designed to make setting up and running a real-world test network achievable in a few minutes. NE-ONE eliminates the need to spend hours learning complex tools with cumbersome tabular interfaces and scripting. Instead, use your preferred browser (no plug-in required) and select the required values using pre-populated network parameters from drop-down menus.

CogWheel

Auto-Configuration - Removing the Guess Work
NE-ONE has a range of Auto-Configuration capabilities to save you time and remove the guess work or need to be a network specialist when setting up your test environment.

 
World Impairments Geolocation Network Latency Calculator
Imagine you need to emulate a link from New York to London but you’re unsure of what latency to use. NE-ONE comes with a catalogue of over 42,000 locations, so simply choose the required start and end point locations and NE-ONE will calculate and insert the base latency for you.
folder Predefined Link Types & Associated Properties
You know that you need to test using a 4G network, a VSAT link or some other type of network but how do you go about creating a range of real-world network experiences? Drawing on our expertise, we have populated the NE-ONE with representative latency, loss, bandwidth and other network characteristics, to reflect Excellent, Good, Average and Poor link qualities typically encountered in real networks. However, for more experienced users or where specific conditions need to be configured, NE-ONE has a comprehensive library of impairment options.
Scenarios2 Scenarios Library
The NE-ONE comes with a set of pre-written network scenarios. These are available locally to be loaded and run. Scenarios include: Coffee Shop Average Wifi to Outside Average 3G; Ship sails away from Land; Underground Station Average WiFi to next Underground Station Average WiFi and More.
TrafficShaping Multiple Concurrent Links (Paths)
NE-ONE’s multi-link feature can simultaneously emulate up to 20 different network links (paths) between the end points, each link with its own characteristics, helping to save valuable testing time. For example, you can set up three links for 2G, 3G, 4G mobile networks and concurrently compare their application performance. NE-ONE’s Link Qualification Criteria enables you to define what IP Addresses, Applications or VLANs use which link.
dual hop

Dual Hop / Last Mile Emulation
Frequently real networks comprise more than a single uniform segment i.e. Dual Hop. There is often another significant portion of the network chain, including a “last mile” hop. For example a data center to a branch office could include a WAN and Wi-Fi in the data path. NE-ONE’s Dual Hop feature allows you to pictorially configure these hops quickly and easily to provide an overall experience to test with.

World Networks

Real-World Network Conditions
When used in Advanced Mode, NE-ONE provides access to more than 50 network impairments that provide accurate, realistic, repeatable and controllable network conditions. Each of these are further customizable to enhance the realism of your test setup. Please refer to the “NE-ONE Emulator Impairment Data Sheet” for more information.

free flow

Free Flowing Traffic
The NE-ONE allows network traffic to pass through, unimpaired, when no emulation is running.
Graph

Graphs & Statistics
NE-ONE’s built-in graphing feature allows you to view key network performance metrics in the GUI. You can also export these statistics for use in other analytical tools enabling you to visualize and understand how the applications are being affected by changes in the network.

CLI

Command Line Interface (CLI) & API
Easily integrate testing over real-world network conditions into your existing test cycle by using NE-ONE’s CLI or API to automate changing network conditions from your functional and/or performance test tools or test scripts. This significantly enhances test processes to identify network deployment risk with minimal impact on test time and resources.

Users

Multi-User
Multiple simultaneous users can access the NE-ONE enabling effective collaboration on configurations, graphs and test results.

Packet

Packet Capture
Full packet capture in pcap format provides pervasive application visibility, analysis and troubleshooting for use with other tools including Wireshark.

 

U.S. 1-888-448-4366
UK. +44 (0)1799 252 200

This site uses cookies. By continuing to use this site you agree to our use of cookies. Privacy Statement